AMPIRE CPM100 SMARTPHONE SCREEN 10" WITH DASHCAM AND REVERSE CAMERA

Would you like Apple CarPlay or Android Auto in the car, without having to replace your original factory car radio? Then the Ampire CPM100 Smartphone screen is just the right product.

High-resolution 10'' touch screen allows for integration with a smartphone on any vehicle.

The Ampire CPM100 Smartphone Display with integrated smartphone interface is compatible with wireless Apple CarPlay ^® and Android Auto. A smart and safer way to use your smartphone in the car.
Everything is operated via the intelligent voice control Siri or OK Google or on the 10" touchscreen display, which you can safely mount on the dashboard.

Everything you want to do with your smartphone while driving can be done directly through this screen with Apple CarPlay ^® or Android Auto. You can easily get directions or send and receive messages. If your vehicle has a hands-free Bluetooth system originally, you can operate it via our smartphone integration and use it to make phone calls. While navigating, you can listen to your favorite music via Spotify or your favorite radio station via a radio app – and still concentrate on the road.

You just have to connect your smartphone wirelessly via WiFi to our screen and you're ready. Even more convenient, you can connect your Apple iPhone wirelessly via WiFi. Wireless Apple CarPlay ^® is possible from the Apple iPhone 5. Audio playback is routed via the audio AUX input (3.5 mm jack) on your factory car radio. Alternatively, an FM transmitter is also integrated, which can also send the sound as an FM signal and be received by your car radio. In addition, a small speaker is integrated into the screen, which can, for example, play navigation messages.

The need for a dash cam is gaining ground more and more. Often it is only such video recordings that can clarify who caused the accident or whether you, as the party involved, are also part of the blame. A full HD dash cam is integrated on the back of the screen, and the second included rear camera can be mounted on the back of the vehicle. The two cameras can save traffic incidents on a microSD card while driving. In addition, the rear camera is displayed in full screen on the screen when reversing.

TECHNICAL SPECIFICATIONS:

Screen

• 10" IPS LCD Touch Screen Monitor
  
• 9.2" / 23.4 cm visible diagonal
  
• Aspect ratio 24:9
  
• the touchscreen display
  
• Adjustable LED backlight
  
• Extremely high resolution 1600 x 600
  
• Brightness 750cd/m²
  
• Contrast 1000:1
  
• Frequency 60Hz
  
• Vertical viewing angle 130
  
• Horizontal viewing angle 150
  
• Our displays are subject to ISO 9241-307, pixel SMARTel wireless Apple

Integration

• Apple CarPlay
  Minimum requirements: iPhone 5 and newer
  
• Wireless Android Auto
  Minimum requirements: Android 11, Android Auto 4.8 and WLAN 5GHz*.
  *IEE standards 802.11a, 802.11ac, 802.11ax, 802.11be & 802.11n
  ATTENTION! Devices that only have WLAN 2.4GHz are not supported and are not compatible!
• Bluetooth

AHD dual dashcam

• Integrated front camera on the back of the screen
• Analog High Definition
• 1080p (1920 x 1080 pixel resolution)
• 30fps frame rate -
• Viewing angle: 120° horizontal, 145° diagonal
• Rear camera / reversing camera
  
• Analog High Definition
  
• 1080p (1920 x 1080 pixels
• Frame rate - 30fps frame rate - frame rate)
• Angle: 120° horizontal, 145° diagonal
• 4P MINI-DIN system plug
• Dimensions without holder: 23 x 23 x 32 mm

Recorder

• Recording resolution: 1080p+1080p or 720p+720p (adjustable)
  
• Length: 1 minute, 1 minute, 3 minutes, 5 minutes
  
• Audio recording can be switched on
  
• Parking lot mode with motion detection and time-lapse recording. 12h or 24h adjustable low voltage protection at 11.8V
  
• Memory card type: microSD (not included)
  
• MicroSD Speed ​​Class: Class 10 or higher
  
• MicroSD memory capacity: min. 32GB to max. 256GB
• Recording capacity: 32GB approx. 4.5 hours, 64 GB approx. 9.5 hours, 128 GB approx. 19 hours, 256 GB approx. 38 hours, then the oldest recordings are overwritten.
  
• Turn on delay (ACC ON): 17 seconds
  
• Turn on delay in parking mode: 0 seconds
  
• OFF delay (ACC OFF): 15 seconds

Rear view camera

• The system's rear camera is used as a reversing camera. There is no need to install a second reversing camera.
  
• 12 Volt contact input for activation
  
• Instantly switch to the system's full-screen rear camera with guide lines when reverse is engaged
  
• Guide lines individually adjustable
  
• Switch-off delay of 3 seconds when reverse gear is disengaged
  
• Dashcam recording function is not interrupted in rear camera mode
• Image playback normal/mirror adjustable
  

Audio Output

• Audio output with 3.5 mm jack cable
  
• FM transmitter for alternative audio playback (87 - 108 MHz.)
  
• Integrated 2 Watt speaker
  
  

Other

• LINUX 4.9 OS operating system with 1GB memory
  
• Apple CarPlay and Android Auto in full-screen mode, or in half-screen mode with simultaneous display of a camera (selectable)
  
• SD card reader (Mirco SD)
  
• USB-C input for power supply
  
• USB-C cable power adapter with ACC ignition logic
  
• Menu language: DE, EN, FR, ESP, RU, JPN, CN, KOR
  
• Automatic ignition when operating voltage is applied
  
• Operating voltage 9V - 36V DC
  
• Current consumption ACC ON: 600mA@12VDC
  
• Current consumption ACC OFF: 8.1mA @12VDC -
  
• Power consumption in parking mode: 290mA@12VDC
  
• Operating temperature: -20° to 70°C
  
• Storage temperature: -30° to 80°C
  
• Screen dimensions (without base): 240 x 100 x 33 mm (42 mm with front camera)
  
• dimensions of system hack camera: 23 x 23 x 32 mm
  
• Weight of screen with base: 518g

Included in the package

• 10" (25.4 cm) touch screen monitor
• Mounting bracket
  
• USB-C connection cable for power supply with +12V, ground and ignition (ACC), 320cm
• AHD system rear camera, 1080p, with butterfly mount and 50cm cable
  
• Connection cable for rear camera system, 550cm
  
• Connection cable audio output (3.5 mm jack), 120 cm